TX7130 Conventional Beam Detector

Short Description:

TX7130 Conventional Beam Detector


Product Detail

Product Tags

1 Feature and Benefits

EN54-12 Compliance
Hassle free alignment,  built with digital guide display and laser beam pointing
Employ single-ended design through reflective mirror
Four ranges wide monitoring from 8-100 meters via encoder
Three users programing sensitivity adjustment
Built-in microprocessor
Self-diagnosis function can monitor for internal faults
Automatic compensation for factors weakening received signals, such as dust contamination, positional movement and ageing of the transmitter
Fire and Fault interfacing relays
Attractive and pleasing appearance
Real User friendly alignment method

2 Technical Specification

Part Number TX7130
Standard  
Listed   LPCB Approval
Compliance EN54-12
Fire Detection and Alarm Systems BS 5839 Part 1
2002  
Specification  
Operating Voltage 20 V to 28 V DC
Current Parameters    
Standby 23mA    
Commission 56mA    
Alarm 33mA
Beam Sensor Sensitivity [via Encoder]                                                           
Level 1 2.6 dB High Sensitivity
Level 2 3.8 dB Medium Sensitivity  
Level 3 5.8 dB Low Sensitivity ●
Beam Pathway Length [via Encoder]  
Span 1 8 to 20 meters Limited Path
Span 2 20 to 40 meters Short Path
Span 3 40 to 70 meters Normal Path
Span 4 70 to 100 meters Long Path
Beam Path Angle ±0.4º Directional
Alignment Guide Laser Beam Pointer
Digital Display Guide Nixie Tube
LED Indicator Guide  
Red Fire
Yellow Fault
Green Alignment
Reset Time Less than 2 Second
Relay Capacity [Fire & Fault] Normally Open & Close/ 2.0 A; 30 VDC
Physical  
Material / Colour ABS / White
Dimension / Weight L
190.87 x W 126.87 x H
91.96 mm / 440 gm  
Weight 0.130 Kg with base
Environmental  
Operating Temperature -10°C to +50°C
Ingress Protection Rating IP30 [IP66 glue seal-For permanent fixing]
Humidity 0 to 95% Relative Humidity, Non condensing

  • Previous:
  • Next:

  • Write your message here and send it to us

    Products categories