TX7100 Intelligent Smoke Detector

Short Description:

TX7100 Intelligent Smoke Detector


Product Detail

Product Tags

1 Feature and Benefits

Using microprocessor technology with memory capacity up to 10 events
Analogue sending and digital addressing
Provide real time algorithm to the control panel
Smart linear drift compensation
Onsite adjustable parameter
360 degree visual indicator
Removable chamber against dust and small insect
Ancillary remote indicator output

2Technical Specification

Aprovals

  LPCB Approval

Compliance

   EN54-7

Input Voltage

  24VDC [16V to 28V]

Current Consumption

  Standby 0.6mA, Alarm  4mA

Protocol/Addressing

  TNA, Value range from 1 to 254

Sensitivity

  As per stipulated standard

Indicator

   Single LED / 360 degree Visual

Material / Colour

  ABS / White Glossy finishing

Dimension / Height

  Diameter 99.7 mm / 57 mm

Weight

  145g (with Base), 90g (without Base)

Operating Temperature

-10°C to +50°C

Humidity

  0 to 95% Relative Humidity, Non condensing

3 Clean

Remove the detector cover by snooping away the four sides tabs using a flat screw driver and then pulling the cover from the base.
Remove the protective screen by pulling it straight out.
Carefully vacuum the chamber and screen. If there is stain, wash with running water and ensure it is completely dry.
Position the chamber and screen by aligning three tiny holes over the sensing component.
Align the LED tube and tabs and gently pushing the cover until it locks into place.
Re-install and test the detector.

01 02

 


  • Previous:
  • Next:

  • Write your message here and send it to us