TX7120 Intelligent Smoke & Heat Detector

Short Description:

TX7120 Intelligent Smoke & Heat Detector


Product Detail

Product Tags

1 Feature and Benefits

EN54-29 Compliance
Using microprocessor technology with memory capacity up to 10 events
Analogue sending and digital addressing
Provide real time algorithm to the control panel
Smart linear drift compensation
360 degree visual indicator
Onsite Adjustable Parameter
Removable chamber against dust and small insect
Ancillary remote indicator output
Aesthetically pleasing design

2 Technical Specification

Listed

LPCB Pending

Compliance

EN54-29

Input Voltage

24VDC [16V to 28V]

Current Consumption

Standby

0.6mA, Alarm

 4mA

Protocol/Addressing

TNA, Value range from 1 to 254

Smoke Sensitivity

As per stipulated standard

Heat Class Type

A2R

Indicator

Single LED / 360 degree Visual

Material / Colour

ABS / White Glossy finishing

Dimension / Height

Diameter 99.7 mm / 57 mm

Weight

145g (with Base), 90g (without Base)

Operating Temperature

-10°C to +50°C

Humidity

0 to 95% Relative Humidity, Non condensing

3 Clean

Remove the detector cover by snooping away the four sides tabs using a flat screw driver and then pulling the cover from the base.
Remove the protective screen by pulling it straight out.
Carefully vacuum the chamber and screen. If there is stain, wash with running water and ensure it is completely dry.
Position the chamber and screen by aligning three tiny holes over the sensing component.
Align the LED tube and tabs and gently pushing the cover until it locks into place.
Re-install and test the detector.

 

01

02


  • Previous:
  • Next:

  • Write your message here and send it to us